frequencyio

Support for frequency based protocols

Warning

This module is not available in SAMD21 builds. See the Support Matrix for more info.

All classes change hardware state and should be deinitialized when they are no longer needed if the program continues after use. To do so, either call deinit() or use a context manager. See Lifetime and ContextManagers for more info.

For example:

import frequencyio
import time
from board import *

frequency = frequencyio.FrequencyIn(D13)
frequency.capture_period = 15
time.sleep(0.1)

This example will initialize the the device, set capture_period, and then sleep 0.1 seconds. CircuitPython will automatically turn off FrequencyIn capture when it resets all hardware after program completion. Use deinit() or a with statement to do it yourself.

class frequencyio.FrequencyIn(pin: microcontroller.Pin, capture_period: int = 10)

Read a frequency signal

FrequencyIn is used to measure the frequency, in hertz, of a digital signal on an incoming pin. Accuracy has shown to be within 10%, if not better. It is recommended to utilize an average of multiple samples to smooth out readings.

Frequencies below 1KHz are not currently detectable.

FrequencyIn will not determine pulse width (use PulseIn).

capture_period :Any

The capture measurement period. Lower incoming frequencies will be measured more accurately with longer capture periods. Higher frequencies are more accurate with shorter capture periods.

Note

When setting a new capture_period, all previous capture information is cleared with a call to clear().

deinit(self)

Deinitialises the FrequencyIn and releases any hardware resources for reuse.

__enter__(self)

No-op used by Context Managers.

__exit__(self)

Automatically deinitializes the hardware when exiting a context. See Lifetime and ContextManagers for more info.

pause(self)

Pause frequency capture.

resume(self)

Resumes frequency capture.

clear(self)

Clears the last detected frequency capture value.

__get__(self, index: Any)

Returns the value of the last frequency captured.